PREVIEW

x10 Active Eye Motion Sensor (Outdoor Motion Sensor) (Model MS16A) (Office/ Tools & Accessories)

Product Overview

The ActiveEye Motion Sensor works anytime, day or night, indoors or Outdoors!

Automatically turn on an area of lights, all controlled by X10 modules.

With the small, sleek and powerful ActiveEye Motion Sensor, you no longer have to leave your lights on all night to ensure your guests have a safe walk up to your door and discourage potential intruders from sneaking up to a darkened home when you are away.


Special Features:

Dawn/Dusk Customization
Easily disable the dawn/dusk feature so it will work 24 hours/day! No need to mask photo-sensor.

Adjustable Time Delay
Set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room.

Secure Construction
Weather resistant case protects the sensor from the elements. Locking screw prevents easy removal of batteries.

Expand Your Homes Security System
When the Protector Plus Voice Dialer is triggered by a door or window sensor, motion detector, it sounds a powerful siren, flashes lights, and calls 4 phone numbers that you specify. Once someone is reached, it plays them your custom “security alert message” and they can listen in to your house directly through the Protector Plus Voice Dialer.

The weather-resistant ActiveEye Motion Sensor wirelessly signals X10 lights to switch on the instant someone sets foot onto your property keeping your home safe and secure while offering a welcoming light to your guests.

The built-in, customizable photocell detects when it's dark so it can save energy by turning lights on only when it detects motion in the dark or you can set it to transmit every time it sees motion, even if it's not dark.

The ActiveEye Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring.

These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.

If you set the ActiveEye Motion Sensor to a unique code (House Code A and Unit Code 1), then walk into the room where the ActiveEye Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select.

The signals transmitted onto your house wiring can also be received by the two-way Computer Interface to initiate macros. The Computer Interface then performs a sequence of events that you've set it up to do.

NOTE: As this unit operates on a wireless frequency, you will need one transceiver for your home (such as the x10 TM751) if you do not already have one.
Reuires 2 AAA Batteries (not included)

About the Author(s)